6
QUICKSTART
3. SAFETY ADVICE
Sylvac machines have been developed with state of the art technology. However, it is important to understand and comply
with a few safety rules.
Read the manual carefully.
Only use the machine in the manner described.
Unqualified or inexperienced people are not authorised to use the machine.
All of the machine’s movements are to be performed behind the safety light
curtain. When this curtain is breached, the machine stops automatically.
It is forbidden to remove or to modify the safety light curtain (except during maintenance
performed by an approved Sylvac representative).
Sylvac SA accepts no liability for any unauthorised modifications.
Emergency stop button: Do not block access to the emergency stop button.
The calliper onto which the headstock and tailstock are attached (which support the piece
to be measured) is supported by two cables which are connected to the counterweight. If
one of the cables is damaged, immediately shut down the machine and replace the cable in
question.
Sylvac SA accepts no liability if the user does not comply with the instructions written on the
machine and contained in the user manual.
To Next Page
Loading...
Need help?
General
