Sylvania SRT902A - SYLVANIA SRT902 A Stand Assembly Guide

-16-
Step One: Pick up the stand from the package as Pict.-1.
Step Two: Pick out the 2 screws from the Stand Head and use later Pict.-2.
Step Three: use the 2 screws from the step two to put into the hole of the fixed stand, later it can
be used to lock the stand head Pict.-3.
Step Four: Lock the fixed stand and Stand Head together as Pict.-4.
Step Five: Loose the Stand Head's locker to move the Unit Lock easier(Pict. -5/-6/-7).
Step Six: Make an enough place to put the stand head into unit as Pict.-8.
Step Seven: Lock the stand into the unit as Pict.-9/10/11.
Step Eight: Completed as Pict.-12.
Pict.-1 Pict.-3Pict.-2
Pict.-8
Pict.-7
Pict.-9
Pict.-4 Pict.-5
Pict.-6
Pict.-10 Pict.-11 Pict.-12
Stand Assemble Instruction ManualXI