SYM 1. GENERAL INFORMATION/TROUBLE DIAGNOSIS
1-1
SYMBOLS AND MARKS....................1-1
GENERAL SAFETY............................1-2
SERVICE PRECAUTIONS.................1-3
SPECIFICATIONS..............................1-9
TORQUE VALUES (ENGINE)..............1-10
TORQUE VALUES (FRAME)............... 1-11
TROUBLES DIAGNOSIS .....................1-12
LUBRICATION POINTS.......................1-16
SYMBOLS AND MARKS
Symbols and marks are used in this manual to indicate what and where the special service are
needed, in case supplemental information is procedures needed for these symbols and marks,
explanations will be added to the text instead of using the symbols or marks.
Warning
Means that serious injury or even death may result if procedures are not
followed.
Caution
Means that equipment damages may result if procedures are not followed.
Engine oil
Limits to use SAE 10W-30 API SH/CD class oil. Warranty will not cover the
damage that caused by not apply with the limited engine oil.
Grease
King Mate G-3 is recommended.
Locking sealant
Apply sealant, medium strength sealant should be used unless otherwise
specified.
Oil seal
Apply with lubricant.
Renew
Replace with a new part before installation.
Brake fluid
Use recommended brake fluid DOT3 or WELLRUN brake fluid.
Special tools
Special service tools.
Correct
Meaning correct installation.
Wrong
Meaning wrong installation.
Indication
Indication of components.
Directions
Indicates position and operation directions.
Components assembly directions each other.
Indicates where the bolt installation direction, --- means that bolt cross
through the component (invisibility).
To Next Page
Need help?
General
