20
○F Seat Open Button
This seat open button is designed to open the seat.
Turn the ignition switch knob to “On” position.
Push this button to open the seat.
○G Ignition Switch Ring
The ignition switch ring only goes on in the below conditions when a verified smart key is in operating
range.
The ignition switch knob is pushed in “Off” position.
The ignition switch is in “On” position.
The ignition switch ring slowly flashes when you are using the answer back function.
When the ignition switch is in “On” position, the ignition switch ring slowly flashes when the smart key is
out of the operating range.
NOTE :
The seat open button can only be operated in “On” position.
CAUTION:
Never operate the ignition switch key when the scooter is running. Turning the ignition switch to “Off ”
position will shut off the electrical system and that may result in a dangerous accident. The ignition
switch can only be turned off after the scooter is completely stopped.
If the ignition switch remains in the “On” position for a prolonged period after the engine is stopped,
the battery voltage will be reduced and this may affect engine’s start capability.
Lock the handlebar before leaving the scooter.
To Next Page
Loading...
