2.Low-voltage protection:
When four indicator lights on the bottom of
aircraft start to flicker, it means electric
quantity of the aircraft is insufficient.
Please control the aircraft to make a
return voyage.
IP4
3.Horizontal correcting function:
Place the quadcopter on a horizontal postion,
then push transmitter both left and right lever
to lowest right conner for about 2-3 second ,
indicator on the quadcopter changed from
normal lights up to quickly flashing ;After 2-3
second ,the indicator changed to normal lights,
it means the quadcopter restarted /reset successfully.
4.3D eversion:
When you are familiar with the basic operation,
you can do some awesome& exciting tricks and
stunts! First of all,fly the aircraft to a height of
more than 3 meters, press the 3D Eversion
switch on the rear right side of the transmitter,
then push the right rudder(in any direction)
to make 360 degree flip.
Tips:3D eversion goes better when battery
power is enough.
5.Headless function:
1. Forward definition
1.
Turn on power switch of remote control.
2.
After aircraft connects with power supply, place the
switch in "ON" position, adjust the direction pointed
by aircraft's handpiece and regard it as the dead
ahead in headless situation.
3.
Push the accelerator's push rod of remote control to
the highest point and pull back to the lowest point.
When remote control pops, it indicates that frequency
modulation and forward definition have already finished.
-8-
To Next Page
Loading...
