SYMA X8C - Fine-Tuning Operations; Preparing for Flight; Function Introduction; Low-Voltage Protection

-7-
Function introduction
1.Low-voltage protection:
When four indicator lights on the bottom
of aircraft start to flicker, it means electric
quantity of the aircraft is insufficient. Please
control the aircraft to make a return voyage.
Sideward fly fine-tuning
Fine-tuning operation
Forward/Backward fine-tuning Turn left/right fine-tuning
When the quadcopter
keeps flying forward /
backward, youcan correct
it by pressing fine-tuning
button down / up.
When the quadcopter
keeps flying to left / right
side, youcan correct it by
pressing the Fine-tuning
button right / left.
When the quadcopter
keeps rotating to left /
right, you can Correct it
by pressing the fine-
tuning button right / left.
Ready to fly your quadcopter
.Press the ON/OFF
power switch up.
2. Open battery cover,
and connect battery
connector with dash
receiver.
3. Enclose battery into
the fuselage, after
closing battery cover,
turn on the switch on
the bottom of aircraft.
4.Push the throttle lever to the highest position,
and then pull it back to the lowest position.
There will be one clear sound from the transmitter,
this shows that the quadcopter has entered into
the pre-fly state.