Symbol ES3000 Guide

ES3000 Advanced Concept Guide
8-6
In-profile actions can be created through the web interface (QoS > Policy Config. > Create In-Profile
Action), the menu interface, or the
diffserv inprofile command in the CLI. The format for the CLI
command is:
diffserv inprofile <id> {drop | dscp <value> | precedence <value>|
cos <value>}
8.2.3 Creating a QOS Out-Profile Action
An out-profile action specifies what is to be done with a class of traffic if it exceeds a specified level
of traffic. The traffic level is specified by both traffic in bits per second and in the burst size in
kilobytes. Exceeding either of these parameters causes the traffic to be considered out of profile.
The combination of a classifier with an in-profile action with one DSCP value and an out-profile action
with a higher DSCP value (lower priority) has the effect of giving that class of traffic faster processing
as long as the volume of the traffic stays under the traffic limits specified in the out-profile.

Symbol ES3000 Specifications

General

IP Rating	IP54
Operating Temperature	14° F to 122° F (-10° C to 50° C)
Storage Temperature	-40° F to 158° F (-40° C to 70° C)
Connectivity	Bluetooth
Operating System Compatibility	Windows