Symbol ES3000 - Creating a QOS Port List

ES3000 Advanced Concept Guide
8-8
,
No-match actions can be specified through the web interface (QoS > Policy Config. > Create No-
Match Action) the menu interface, or the
diffserv nomatch command in the CLI. The CLI command
take the form:
diffserv nomatch <id> {drop | dscp <value> | precedence <value> |
cos <value>}
8.2.5 Creating a QOS Port List
QoS policies apply to a specified list of ports. The port list may be specified through the web interface
(QoS > Policy Config. > Create Port List), menu interface, or the
diffserv portlist command. The
format of the CLI command is:
diffserv portlist <datapath-id> <portlist>
where datapath-id is an index and portlist is a list of port numbers or port number ranges,
separated by commas.