QOS Management
8-11
8.4 Configuring QoS Queues
Each port has four output queues. The packets are sorted into the output queues depending on their
CoS priority values. See Creating a QOS In-Profile Action on page 8-4 a discussion of CoS priority.
The queues are serviced using a strict queuing algorithm. Packets in the highest-priority queues,
starting with queue #3 are serviced before any packets from a lower-priority queue.
The queues are initially configured as follows:
Queue CoS values
36,7
24,5
12,3
00,1
To Next Page
Loading...
