What to do if water is leaking from the diverter valve on my Symmons 3DIV-BODY?
If water is leaking from the face of your Symmons Plumbing Product's diverter valve, it's likely that the cap assembly isn't fully sealed. You should remove the cap assembly, check the threads for any debris, and then reinstall the cap assembly to the diverter valve, tightening it to 75 ± 5 lbf-in of torque.
How to fix a Symmons 3DIV-BODY diverter valve that will not divert water?
If the diverter valve on your Symmons Plumbing Product isn't diverting water, it could be due to foreign matter blocking the plumbing lines or the diverter valve cartridge. Remove the cartridge and flush the lines to clear any blockages. Inspect the cartridge for debris and replace it if necessary.
Why won't the diverter trim install to the diverter valve on my Symmons 3DIV-BODY?
If the diverter trim won't install to the diverter valve on your Symmons Plumbing Product, it's possible the diverter valve body rough-in is too deep. Use RTS-DIV-1EXT to extend the diverter stem by 1 inch.
What to do if the cartridge wobbles in the diverter valve of my Symmons 3DIV-BODY Plumbing Product?
If the cartridge wobbles inside the diverter valve of your Symmons Plumbing Product, preventing it from fully seating, it means the diverter valve needs a retaining sleeve (F) to ensure the cartridge is properly installed. Use retaining sleeve (F) in RTS-3DIV to secure the cartridge within the diverter valve.
Details available model numbers, diverter features, materials, and compliance standards.
Outlines warranty terms for different installations and includes California Proposition 65 warning.
Provides key measurements and hole sizes required for diverter valve installation.
Lists specific replacement parts with their descriptions and part numbers.
Details the tools necessary for performing installation and maintenance tasks.
Highlights critical safety warnings and handling instructions during installation.
Provides a sequential guide for correctly installing the diverter valve.
Explains how to operate the diverter to select different water outlet functions (1-3).
Details how to select combined functions (4-6) for the diverter valve.
Step-by-step instructions for removing and replacing the diverter cartridge.
Provides critical notes on cartridge alignment, sleeve insertion, and torque.
Offers solutions for common issues like non-diversion, leaks, and improper seating.
General| Material | Brass |
|---|---|
| Connection Size | 1/2 inch |
| Brand | Symmons |
| Model Number | 3DIV-BODY |
| Product Type | Valve Body |
| Compatibility | Symmons Temptrol |
| Application | Shower |
To Next Page