Symmons TA-10 - User Manual

Replacing a TA-10 Spindle
1) First, you need to make sure the water to the valve has been shut o. Then, we need to
open the valve to the warm/hot posion. Ulizing your handle, rotate counter-clockwise un-
l the handle stops.
2) Using a wrench, rotate the cap assembly (T-12A) counter-clockwise unl the cap (T-12A)
and spindle assembly (TA-10) are removable from the valve body.

Symmons TA-10 Specifications

General

Brand	Symmons
Model	TA-10
Category	Plumbing Product
Language	English