Technical Manual 51
PROGRAMMING
PROGRAMMING
Menu Level 2: System Clock
Line 1 indicates that you are currently on the System Clock screen.
Line 2 indicates the programmable time for the machine in a 24 hr format.
Line 3 indicates the programmable date settings.
Line 4 stores the programmed date in the format indicated on line 3
Press the line 2 button followed by the ‘▲’ ‘▼’ buttons to make appropriate adjustments to the 24 hr
clock so that any alarms programmed will work correctly.
To adjust line 4, press the corresponding button followed by the ‘▲’ ‘▼’ buttons to select the
appropriate date.
Press the line 1 button to cycle to the next display screen.
To Next Page
Loading...
