15
Chapter 2: Hardware Setup
Replace System Fan
Your DiskStation will beep if either of the system fans is not working. Follow the steps below to replace the
malfunctioning fan with a good one.
To replace the system fan:
1
Shut down your DiskStation and disconnect all connected cables to prevent any possible damages.
2
Fans are numbered as follows:
3
Remove the 4 screws that secure the fan panel.
4
Remove the malfunctioning fan:
a
Pull the fan panel from your DiskStation.
b
Disconnect the 2 fan cables from the connectors located near the bottom of the fan socket, and then remove
the fan panel.
To Next Page
Loading...
