Synology DiskStation DS916+ - Chapter 2: Hardware Setup; Tools and Parts for Drive Installation; Install Drives

6
2
Chapter
Tools and Parts for Drive Installation
• A screwdriver (only for 2.5" drives)
• At least one 3.5” or 2.5” SATA drive (please visit
www.synology.com
for compatible drive models.)
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data. Please
back up any important data before installation.
Install Drives
1
Remove the drive bay cover from the front panel.
2
Push the latch upward and pull the handle to remove the drive tray.
Hardware Setup