laser safety
14
Synrad Firestar f-Series operator’s manual
f100 Declaration of Conformity
Declaration of Conformity
in accordance with ISO / IEC 17050-2:2004
We,
Manufacturer’s Name: SYNRAD, Inc.
Manufacturer’s Address: 4600 Campus Place
Mukilteo, WA 98275
U.S.A.
hereby declare under our sole responsibility that the following equipment:
Product Name: Firestar f100 Laser
Model Number: FSF100KD (Keyswitch)
FSF100SD (OEM
*
)
conforms to the following Directive(s) and Standard(s):
Applicable Directive(s): 2004/108/EC Electromagnetic Compatibility Directive
2006/95/EC Low Voltage Directive
2011/65/EU RoHS Directive
Applicable Standard(s): EN 61010-1:2001 Safety Requirements for Electrical Equipment
for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
EN 60825-1:2007 Safety of Laser Products (Keyswitch only)
EN 55011:1998 Conducted and Radiated Emissions
Group 2, Class A
EN 50082-1:1997 RF Electromagnetic Immunity
EN 61000-4-2:1995
+A1:1998 Electrostatic Discharge Immunity
EN 61000-4-3:1999 RF Electromagnetic Fields Immunity
EN 61000-4-4:1995 Electrical Fast Transient/Burst Immunity
EN 61000-4-6:1996 Conducted RF Disturbances Immunity
*
OEM lasers do not comply with EN 60825-1:2007, Safety of Laser Products. Buyers of OEM laser products are solely responsible
for meeting applicable Directives and Standards for CE compliance and marking.
Corporate Officer: European Contact:
Dave Clarke, President of SYNRAD, Inc.
Dated 07 May 2012
Synrad Europe
Münchener Straße 2A
D-82152 Planegg
Germany
To Next Page
Loading...
