Synrad Firestar Series User Manual

index
i2
SYNRAD OEM v30 Operator’s Manual Version 2
Control connections 1-12—1-16
Controlling laser power 3-5—3-8
control signals, 3-5—3-7
operating modes, 3-7—3-8
Controls and indicators 7, 2-2—2-3
OEM v30 front panel, 2-2
OEM v30 rear panel, 2-3
Control signals 3-5—3-7
Command signal, 3-6—3-7
Pulse width modulation (PWM), 3-5—3-6
Tickle pulse, 3-5
Coolant
draining, 1-3, 4-3
type, 1-8
Coolant temperature 1-8, 1-9, 1-10, 2-5,
3-21, 4-12, 4-14
Cooling connections 1-7—1-12
air/fan, 1-11—1-12
water, 1-7—1-10
Cooling fans
clearance, 1-11
rear mounted, 1-11—1-12
recommended locations, 1-11—1-12
side mounted, 1-11
specications, 1-11
Cooling ttings 1-3, 1-7
Cooling ports 1-7, 1-10, 2-3
Cooling tubing 1-4, 1-5, 4-2, 4-14
connecting, 1-10
guidelines, 1-7
Cooling water
connections, 1-7, 1-10
draining, 1-3, 4-3
ow rate, 1-8, 1-10, 2-5, 4-14
specications, 1-8, 3-21
temperature setpoint, 1-8, 1-9, 1-10, 2-5,
3-21, 4-12, 4-14
Copyright information viii
Customer Service x
D
Daily inspections 4-2
Danger
denition, 1
explosive atmospheres, 1
eye protection, 1, 2-4, 4-6
laser radiation, 1, 2-4, 4-3, 4-6, 4-18
DB-9 (Interface A) connector 1-5, 1-13, 1-14,
2-3, 2-5, 2-6, 3-9—3-15, 4-13, 4-14, 4-16
input circuitry, 3-11—3-13
input circuit specications, 3-12
output circuitry, 3-13—3-15
output circuit specications, 3-14
output signal states, 4-8—4-10
pinouts, 3-9
Quick Start Plug, 1-5, 1-14, 4-14
signal descriptions, 3-10
UC-2000 connection, 1-15
DC ground 1-12
DC Out output 1-15, 3-9, 3-12, 3-13, 3-15,
3-19, 4-16, 4-17
signal description, 3-10, 3-16
signal specications, 3-9, 3-13
DC power 7, 2-4, 4-2, 4-3, 4-12, 4-13, 4-15,
4-16, 4-18
caution, 1-13, 1-14, 3-9, 3-12, 3-15, 3-18
connecting to laser, 1-12—1-13
requirements, 1-13, 3-21
DC power cables 1-5, 1-12, 2-3
connecting, 1-13
fuse location, 1-16
DC power supply 2-3, 2-5, 2-6, 4-13, 4-15,
4-16
connecting, 1-11—1-12
ground, 1-12
specications, 1-13
DC Sense Fault 4-12, 4-13, 4-16
DC Voltage Fault output 3-13, 4-8, 4-9, 4-10,
4-11, 4-13, 4-15, 4-16
signal description, 3-10
signal specications, 3-14
Declaration of Conformity 9
Delivery optics 3-3—3-4
Dew point 1-8, 4-2
cautions, 1-10
chart, 1-9
Diode Pointer
aperture dust cover, 2-5, 2-6
Disabling Firestar 4-2
Divergence 3-2, 3-3
specications, 3-21
E
Electrical connections 1-12—1-13
Error codes. See Fault codes

Synrad Firestar Series Specifications

General

Brand	Synrad
Model	Firestar Series
Category	Measuring Instruments
Language	English