Syntec 60CA - Page 140

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
How to Operate 60 Series Controller– 140
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
•
•
Path: F2 "Program" => F8 "File Manager" => F4 "File Transfer" => F2 "File Export"
A window will show up on screen, press F5 "Device Select", and move cursor to the desired
external device
Press "Enter" to access the desired external device. With red cross on the device icon, it means
that there is no connection between CNC and this external device.
Press F2 "Select" to choose file. The box will be checked. Press F2 again to cancel it.
Press F3 "Select All" to select all files.
Press F4 "Cancel Select" to cancel all chosen files.
If the file is in the folder, move cursor on the folder and press "Enter" to enter it.
Move cursor on the "..." folder and press "Enter" or just press "Backspace" to back to the parent
folder.
Press F1 "Copy" to complete file exporting.
After complete file transfer, press "Exit" or ESC to leave this window
If user would like to change the destination external device, press F6 "Window Select". Cursor will
move to external device, which is the right window.
Note:
While user try to enter a unconnected external device, the warning window shows as below.