Syntec 60CA - User Authority; Reset Password

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 69
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Set the authorities of each function when no user logs in.
User Authority
Path
5 key: F5 Maintain → Next → Next → F4Authority Management → F3 User Authority
8 key: F5 Maintain → Next → F4Authority Management → F3 User Authority
10+8 key: G5 Maintain→ F9 Authority Management→ F3 User Authority
Explanation
The machinery or administrator can set the authorities of each user account.
4.9.12 Reset Password
Path
5 key: F5 Maintain → Next → Next → F5 Reset Password
8 key: F5 Maintain → Next → F5 Reset Password
10+8 key: G5 Maintain→ Next→ F1 Reset Password
Explanation
Can be used to reset the password of the machinery
4.9.13 About
Path
5 key: F5 Maintain → Next → Next → Next → F5 About
8 key:F5 Maintain → Next → F8 About
10+8 key: G8 System→ F10 About
Explanation
Provide system information of the controller.
Provide information of axial driver and motor.
Provide information of the spindle driver and motor.
System permissions-related settings.
Machinery information.
About
Path
5 key: F5 Maintain → Next → Next → Next → F5 About → F1 About
8 key: F5 Maintain → Next → F8 About → F1 About
10+8 key: G8 System→ F10 About
Explanation
Display system information