Syntec 60CA - Forget Password; Authority Management; Change Password

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 68
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Enter user account and password to login the system.
Different permissions can be set for each user account
Permissions of each account can be set in “Authority Management” page.
4.9.9 Logout
Path
5 key: F5 Maintain → Next → Next → F2 Logout
8 key: F5 Maintain → Next → F2 Logout
10+8 key: G5 Maintain→ F8 Logout
Explanation
Logout the currently logged in account.
4.9.10 Forget Password
Path
5 key: F5 Maintain → Next → Next → F3 Forget Password
8 key: F5Maintain → Next → F3 Forget Password
Explanation
For general users, please contact the administrator to reset the password.
For machinery or administrator, please contact Syntec to reset the password.
4.9.11 Authority Management
Path
5 key: F5Maintain → Next → Next → F4 Authority Management
8 key: F5Maintain → Next → F4 Authority Management
10+8 key: G5 Maintain → F9 Authority Management
Explanation
Set user's access to each function.
Please refer to Account Management Application Manual.for further details
Change Password
Path
5 key: F5Maintain → Next → Next → F4Authority Management → F1 Change Password
8 key: F5Maintain → Next → F4Authority Management → F1 Change Password
10+8 key: G5 Maintain→ F9 Authority Management→ F1 Change Password
Explanation
Change the password of the currently logged in user.
The original password is required
Default Authority
Path
5 key: F5 Maintain → Next → Next → F4Authority Management → F2 Default Authority
8 key: F5 Maintain → Next → F4Authority Management → F2Default Authority
10+8 key: G5 Maintain→ F9 Authority Management→ F2 Default Authority
Explanation