Syntec 60CA - Monitoring Machining Status

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 47
•
•
•
•
•
•
•
•
•
•
•
•
-5-axis (need to turn on Option12 or Option13)
-Refer to chapter3.4.3
4.7.6 User Parameter Setting
Command
5 key, 8 key: F3 Offset/Setting → F4 User Param.
10+8 key: G3 Offset/Setting→ F4 User Param.
Function
SYNTEC controller provided users to set the required related machining parameter.
Parameters
Please refer to "Mill Parameter Manual" for further details.
4.8 Monitor (MainFenu: F4)
Path
5 key, 8 key：F4 Monitor
10+8 key：G4 Monitor
Function
This fenubar group provides the necessary information which needs to be monitored during
machining process.
Fenubar Introduction