Syntec 60CA - File Manager Operations

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 34
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4.6.8 File Manager
Command
5 Buttons type: F2 Program→F4 File Manager
8 Buttons type: F2 Program→F8 File Manager
Function
This function key can manage all of the NC files within the data storage device. The device can be
setting with Pr3213.
Operation Method
Use【↑】【↓】on the key pad to move the cursor to anywhere on the screen for editing purpose.
With 【Page Up】【Page Down】to switch the cursor between pages.
Press【ENTER】on the key pad, to assign the current cursor file as the execute file, screen will show
up with the program content and can enable to edit the program.
New File
Command
5 Buttons type: F2 Program→F4 File Manager→F1 New File
8 Buttons type: F2 Program→F8 File Manager→F1 New File
Function
Open a new file, that file will be the current edit file.
Operation Method
Press 「New File」function key, a dialog box will appear, enter the new file name and press
【ENTER】.
Note