Syntec 60CA - Page 67

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 67
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8 key: F5 Maintain→ F8Use Time Setting
10+8 key: G5 Maintain→ F10Use Time Setting
Explanation
Can be used to set the system use time
Please ask the original manufacturer for the setup password
Remote Authorization
Path
5 keys: F5 Maintain → Next → F3 Use Time Setting → F5 Require a license to use
8 key: F5 Maintain → F8 Use Time Setting → F8 Require a license to use
10+8 key: G5 Maintain→ F10Use Time Setting → F10 Require a license to use
Explanation
This fenu button will only be displayed when CNC has an authorization term and connects to
cloud service successfully.
Press this fenu button to apply to the machinery for remote authorization. If remote
authorization is successfully, the system use time will be extended.
From 10.118.42Q, 10.118.48B, 10.118.49.
4.9.8 Login
Path
5 key: F5 Maintain → Next → Next → F1 Login
8 key: F5 Maintain → Next → F1 Login
10+8 key: G5 Maintain→ F7 Login
Explanation