Syntec 60CA - Page 93

机床产品/Machine Tool Products – 60CA/60CB Simple-Type Wood Cutting Machine Operation Manual
Fenu and System Introduction– 93
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Start server while boot
Start the server after booting or not
Timeout(ms)
Set the acceptable timeout for connection failure
Start Server
Path
F5 Maintain → F2 Set Kernel Server → F5 Set Kernel Server →F1 Start Server
Explanation
Start the kernel server immediately.
4.9.16 Fast Diagnostic
Path
5 key, 8 key: F5 Maintain → F3 Fast Diagnosis
10+8 key: G5 Maintain→ F3 Fast Diagnosis
Explanation
Display basic system information for diagnosis.
System Data
Path
5 key, 8 key: F5 Maintain → F3 Fast Diagnosis → F1 System Data
10+8 key: G5 Maintain→ F3 Fast Diagnosis→ F1 System Data
Explanation
Display basic system and spindle information for diagnosis.