10
6.1.1 Enter the crease position from the keypad then press to acknowledge
the input. The measurement is from the feeding edge to the creasing position. 32
position data can be processed in one pass once. Press to delete input.
Press and hold it for 3 seconds to clear all data in this group. After finishing
all settings, press twice to get into standby mode then press or
to start processing sheets.
6.2. Cover Hinge: In the standby status, press to access the setting menu.
Press or to choose "cover hinge" then press .
6.2.1 Cover Hinge 1:
To Next Page
Loading...