20
7.2 Creasing Depth
7.2.1 Creasing depth is important to crease quality. It depends on the gap
between upper die and lower die. Creasing depth should be adjusted according to
paper thickness.
Normal
Too light
Not balance
Crack edge Too heavy
11.5.2 To adjust the creasing depth, open the top cover and adjust 3 allen screws
on the bar. Depend on paper type and feeding situation to adjust it. Turn clockwise
to get a deeper crease and turn counter-clockwise to get a shallower crease.
3 Creasing depth adjusting screws
To Next Page
Loading...