MAINTENANCE AND SUPPLIES REPLACEMENT
Sysmex KX-21 Operator’s Manual -- Revised October 1998 4-23
(6) Press [1] key to select "1: Reset." "Cycle No. after cleaning" is reset to "0," the date
of the present day is entered in the "Date last serviced" column, then the Analysis
screen returns.
NOTE: • Press [3] key to select "3: Cancel." The cycle counter is not reset, and
the Analysis screen returns.
• For confirmation of SRV cycle counter, refer to
Chapter 4, Section 9:
CONFIRMATION OF CYCLE NUMBER
.
To Next Page
Loading...
