QUALITY CONTROL
5-26 Sysmex KX-21 Operator’s Manual -- Revised October 1998
(4) Press [1] key to select "1: Delete."
The Deletion confirmation message appears.
OK to Delete? Yes No
Figure 5-3-3: Deletion Confirmation Message
(5) Using [ ] key or [ ] key, move the cursor to select "Yes" or "No."
[Yes]: Deletes QC data of the plot shown by the line cursor and returns the line cursor
to the dotted line.
[No]: Cancels deletion of QC data and returns the line cursor to the dotted line.
(6) Press [ENTER] key to execute the selected process.
To Next Page
Loading...
