TROUBLESHOOTING
Sysmex KX-21 Operator’s Manual -- Revised October 1998 7-19
Error Message Meaning of Message
"Sampling Error"
ERR CODE:XXXXX.X.X
*
Help
*
Sampling Error has occurred.
3:Retuen
Sampling data falls into disorder.
Sampling data refers to the count taken every
0.5 seconds during counting. The system
monitors the counts taken.
Cause 1) CPU malfunction due to sudden noise interference, etc.
Action 1) Turn OFF then ON the power again.
If the error persists after turning ON the power again, contact your
Sysmex service representative.
Analysis after error
occurrence
Ready for analysis (although the next sample could be affected)
NOTE: • Press [3] key to return to the Analysis screen. Although the system is
ready for analysis, the error may occur in the next analysis.
To Next Page
Loading...
