SYSMEX KX-21 - Page 260

INSTRUMENT SETUP
Sysmex KX-21 Operator’s Manual -- Revised October 1998 10-7
3. DATE/TIME SETTINGS
This instrument displays date/time on analysis data, using the built-in clock.
This program is used to set the date/time for the built-in clock and date format.
How to Set Date/Time
(1) Press [SELECT] key on the Analysis screen. The Select Menu screen appears.
(2) Using [ ] or [ ] key, move the cursor to select "6: Settings."
(3) Press [ENTER] key. The Setting Menu screen appears.
*Settings*
1:System Setup
2:Date/Time
3:Patient Limit
4:QC Settings
5:Host Settings
6:Printer Settings
7:Print Set Values
Figure 10-3-1: Setting Menu Screen
NOTE: • "5: Host Settin
g
s" is displa
y
ed onl
y
when the optional serial interface is
incorporated.
(4) Using [ ] or [ ] key, move the cursor to select "2: Date/Time."
Sysmex KX-21 Operator’s Manual -- Revised January 2000