SYSMEX KX-21 - Page 274

INSTRUMENT SETUP
Sysmex KX-21 Operator’s Manual -- Revised October 1998 10-21
7. PRINTER SETTINGS
This program is used to set the output selection and output conditions for the built-in printer.
How to Set Printer Output
(1) Press [SELECT] key on the Analysis screen. The Select Menu screen appears.
(2) Using [ ] or [ ] key, move the cursor to select "6: Settings."
(3) Press [ENTER] key. The Setting Menu screen appears.
*Settings*
1:System Setup
2:Date/Time
3:Patient Limit
4:QC Settings
5:Host Settings
6:Printer Settings
7:Print Set Values
Figure 10-7-1: Setting Menu Screen
NOTE: • "5: Host Settin
g
s" is displa
y
ed onl
y
when the optional serial interface is
incorporated.
(4) Using [ ] or [ ] key, move the cursor to select "6: Printer Settings."
(5) Press [ENTER] key. The current setting status is displayed on the Printer Settings
screen.
Print Format Type1
Press [SELECT] to exit.
*
Printer Settings
*
Print Condition All Data
Connect Use
Figure 10-7-2: Printer Settings Screen
Sysmex KX-21 Operator’s Manual -- Revised January 2000