SYSMEX KX-21 - Page 79

DISPLAY AND PROCESSING OF ANALYSIS RESULTS
3-10 Sysmex KX-21 Operator’s Manual -- Revised October 1998
2.3 Printing
This menu can be used to output the latest sample's analysis result from the built-in printer.
Printing of Latest Sample
(1) Press [2] key on the Analysis screen and select "2: Print."
The built-in printer starts printing analysis result.
NOTE: • For printin
g
format, refer to Chapter 2, Section 5.2: Printin
g
of Anal
y
sis
Result
. To chan
g
e the printin
g
format, refer to Chapter 10, Section 7:
Printer Settin
g
s .
Contents of Printing
Parameter Discriminated Manually
Mode Indication
Date/Time Analyzed
Sample No.
• • • •
No. 123456
Date 31/12/97 23:59
Mode WB [W][R][P]
WBC WL+11.3 ×10
3
/µL
RBC +3.80 ×10
6
/µL
HGB +11.5 g/dL
Figure 3-2-11: Example of Printing
1) Sample No.
The latest sample No. is printed.
2) Mode Indication
The mode in which sample was analyzed is printed. The whole blood mode is
printed as "WB" and the pre-diluted mode as "PD."
3) Date/Time Analyzed
Date and time when analysis result was obtained are printed.
4) Parameter Discriminated Manually
When M. Discri is used, the parameter discriminated manually are printed.
2.4 Printer Paper Feed
(1) Press [3] key on the Analysis screen and select "3: Paper Feed." While the key is
being held in, paper feed continues.
Sysmex KX-21 Operator’s Manual -- Revised January 2000