SYSMEX KX-21 - Page 81

DISPLAY AND PROCESSING OF ANALYSIS RESULTS
3-12 Sysmex KX-21 Operator’s Manual -- Revised October 1998
3.2 Stored Data Screen
The Stored Data screen lists data of up to eight samples in the order of analysis. When the
first Stored Data screen is displayed after turning on the power, the data of the last eight
samples on the list are displayed. When a new sample is analyzed, its data is automatically
added to the last line of the list.
As to analysis data, four parameters are displayed on one page. And there are five pages in
total. Using [ ] key or [ ] key, a page with four parameters can be changed over to the
next page.
P2. Stored Data
Screen [2/5]
MCV, MCH, MCHC, PLT
P3. Stored Data
Screen [3/5]
WBC, LYM%, MXD%, NEUT%
P5. Stored Data
Screen [5/5]
RDW, PDW, MPV, P-LCR
P4. Stored Data
Screen [4/5]
WBC, LYM#, MXD#, NEUT#
P1. Stored Data
Screen [1/5]
WBC, RBC, HGB, HCT
Figure 3-3-2: Page Selection in the Stored Data Screen
No.
123451*
QC01
123453
123454 PD
123455* PD
123456 PD
123457
123451*
Date 31/12/97 12:59
[1/5]
WBC
7.7+
7.5
7.5+
7.1
7.2
5.5-
7.0
7.6+
RBC
3.97
4.51
3.85
4.30+
3.91
3.90
4.05
3.98
HGB
14.7
14.1
13.8
12.2
14.3
15.1
18.5
15.0
HCT
32.8
34.7
30.5
29.5-
32.0
40.2+
31.4
35.1
*
Stored Data
*
[ENTER] to mark, [SELECT] to exit.
Figure 3-3-3: Stored Data Screen
Key Operation for Stored Data Screen
[
] key: Moves up the underline cursor by one sample. When the underline
cursor is at the top, the list scrolls down.
[ ] key: Moves down the underline cursor by one sample. When the
underline cursor is at the bottom, the list scrolls up.
[ ], [ ] key: Changes over the page.
[ENTER] key: Attaches or deletes marks.
[SAMPLE No.] key: Allows you to correct the sample number at the underline cursor.