SYSMEX KX-21 - Page 84

DISPLAY AND PROCESSING OF ANALYSIS RESULTS
Sysmex KX-21 Operator’s Manual -- Revised October 1998 3-15
6) Not-output Data
If the optional serial interface has been mounted, the mark will appear next to the
data which has not been output to the host computer. This mark disappears when the
data output is completed.
No.
123451* PD
QC01 PD
123453 PD
123454*HPD
123455*HPD
123456*HPD
123457*HPD
123451*HPD
Date 31/12/99 12:59
[1/5]
WBC
7.7+
7.5
7.5+
7.1
7.2
5.5-
7.0
7.6+
RBC
3.97
4.51
3.85
4.30+
3.91
3.90
4.05
3.98
HGB
14.7
14.1
13.8
12.2
14.3
15.1
18.5
15.0
HCT
32.8
34.7
30.5
29.5-
32.0
40.2+
31.4
35.1
*
Stored Data
*
[ENTER] to mark, [SELECT] to exit.
Figure 3-3-5: Not-Output Data
3.3 Deletion
This menu allows deletion of marked analysis data from stored data.
Execution of Deletion
(1) Using the underline cursor, specify the analysis data you want to delete and press
[ENTER] key. This puts the mark on the analysis data.
(2) Press [1] key to select "1: Deletion." The Deletion Confirmation message appears.
Delete? YES NO
Figure 3-3-6: Deletion Confirmation Message
(3) Using [
] key or [ ] key, move the cursor to select "Yes" or "NO."
[Yes]: Deletes the marked analysis data.
[NO]: Cancels deletion.
(4) Press [ENTER] key to execute the selected process.
When you press [SELECT] key, the process is canceled.
NOTE: • Before deleting data, make sure the KX-21 completes any output
operation to the printer or host computer.