EasyManua.ls Logo

System One 501 - Operation and Service; Safe Operation of Parts Washer; Equipment Service Guidelines

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P/N: 60400601
REV: 02/04
4
· WARNING: Solvent used in this Recycling Parts Washer is a combustible liquid and vapor. Adding
other chemicals to the cleaning solvent, including but not limited to kerosene, fuel oil, gasoline,
detergents, or chlorinated solvents may cause hazardous conditions which the manufacturer has no
control over and bears no responsibility.
· The parts washer lid has a fusible link assembly that holds the lid open during use. This fusible link is
a safety feature designed to release the lid in case of fire allowing the lid to close. Do not modify,
alter, or obstruct the operation of the fusible link. Do not leave unattended objects in the sink which
would interfere with the closing of the lid.
· Do not place hot parts into the Recycling Parts Washer.
· Do not spray aerosols into or around Recycling Parts Washer.
· Do not clean or degrease porous or absorbent materials, such as cloth, leather, wood or paper.
· Do not operate Recycling Parts Washer if any leak is apparent or occurs during use. Contact your
service representative.
· Unit produces heat. Do not open the distillation drain knob during a recycle process, or if hot to
touch. Allow the unit to complete the recycle process and always be sure it is cool before
attempting to remove oil waste.
· Close fire lid when not in use.
· Cleaning operations should be conducted in a manner that prevents spillage, splashing, or
misting.
· Service should only be performed by an authorized technician. Risk of electric shock or serious
injury may occur if improperly serviced.
· MODIFICATION OF EQUIPMENT WILL VOID THE MANUFACTURER WARRANTY.
Operation
Service

Related product manuals