16
| EU Declaration of conformity
Current L2 [A]: Air volume [m3/s]:
Current L3 [A]:
Differential pressure [Pa]*:
*For single-phase fans, fill in line “Current L1 [A]” *Δ- Pressure between suction-side and discharge of the fan
If an air flow measurement is not possible, this value can be calculated using the following formula:
X
=
Duct cross-section [m²]
Flow speed [m/s]
Grille measurement acc. to VDI 2044
Air volume [m³/s]:
Yes No
Commissioning of the fan successful?
□ □
Date, installer's signature
Date, operator's signature
16 EU Declaration of conformity
The manufacturer: Systemair GmbH
Seehöfer Straße 45
97944 Boxberg
Germany
Product designation: Axial fans
Type designation:
AXC; AXC (K); AXC (B); AXC (F); AXC-G; AXC (B)-G; AXC-P; AXC (B)-P; AXC-E; AXC-EK;
AXC(B)- EK; AXR; AXR (K); AXR (B); AXR (F); AXCBF; AXS; AJ; AJ (K); AJ (B); AJ (F); AJ-
TR; AR; AW; AXCP; AXCP (B), AXCP (F), AXCPV, AXCPV (B), AXCPV (F)
Since year of manufacture:
2016
The manufacturer declares that the above mentioned products in their design and construction and the version
marketed by us complies with the harmonization legislation listed below:
EU directives: 2006/42/EC Machinery directive
2014/30/EU Directive electromagnetic compatibility (EMC)
2011/65/EU RoHS directive
2009/125/EC ErP guidelines
Regulations: 327/2011 Only for fans above 125W, CE marked fans used as
components are CE marked by other manufacturer.
| 003
To Next Page
Loading...
Need help?
General