22
|
Commissioning Report
Current L1 [A]*:
Fan impeller speed [rpm]:
Current L2 [A]: Air volume [m3/s]:
Current L3 [A]:
Differential pressure [Pa]*:
*For single-phase fans, fill in line “Current L1 [A]” *Δ- Pressure between suction-side and discharge of the fan
If an air flow measurement is not possible, this value can be calculated using the following formula:
X
=
Duct cross-section [m²]
Flow speed [m/s]
Grille measurement acc. to VDI 2044
Air volume [m³/s]:
Yes No
Commissioning of the fan successful?
□ □
Date, installer's signature
Date, operator's signature
To Next Page
Loading...
Need help?
General