SystemAir SAVE VTR 300/B User Manual

2
| Type label
3 Type label
Before calling your service representative, make a note of the specification and production number from the type label,
which can be found on the side of the units, next to the external connections.
Fig. 1 Type label
Position Description
1
Product code (product specification)
2
Product item number
3
Production order number
4
Serial number
5
Production date (YY.MM.DD)
3.1 QR code
QR code is an optical label that contains the list of spare parts and documentation. The QR code label can be found next
to the type label.
Use a mobile application or any other QR code reader to access its contents.
Fig. 2 Example of QR code label
4 Product description
The SAVE VTR 300/B is a heat recovery ventilation unit with a built in rotating heat exchanger. The SAVE VTR 300/B is
suitable for houses with up to 240 m
2
heated living area. It supplies filtered outdoor air to residential areas and extract
air from bathroom, kitchen and wet rooms.
SAVE VTR 300/B is equipped with a 1670 W electrical re-heater battery.
4.1 Left and Right models
There are two model options, right (R) and left (L) model. The different models are recognized by the placing of the in-
ternal components and the supply air outlet, which is situated on left side of the unit on an (L) unit and on the right hand
side on an (R) unit..
211476 | A001

SystemAir SAVE VTR 300/B Specifications

General

Brand	SystemAir
Model	SAVE VTR 300/B
Category	Fan
Language	English