Systemline S7 NetAmp User Manual

SN1100
2 Zone NetAmp
Systemline 7 NetAmp, two zone smart multi-room amplifier
Instruction manual: NetAmp IR control

Systemline S7 NetAmp Specifications

General

Channels	2
Audio Outputs	Speaker terminals
Amplifier Zones	1
Frequency Response	20 Hz - 20 kHz
Audio Inputs	RCA
Network Connectivity	Wi-Fi, Ethernet
Streaming Services	Spotify, Tidal, Deezer
Control	IR
Audio Formats Supported	MP3, WAV, FLAC, AAC
Signal-to-Noise Ratio	90 dB
Input Impedance	47kΩ

Summary

IR Control of Netamp

IR Code Table

Setting up a Sky HD handset for NetAmp volume

Setup Procedure

Steps to configure Sky HD handset for NetAmp volume control using code 1217.

Volume/Mute Allocation (Sky Mode)

Handset allocates volume/mute buttons in Sky control mode.

Additional Functions (TV Mode)

Handset allocates additional IR functions in TV control mode.

Setting up a Sky HD remote for TV control

TV Control Setup

Procedure to configure Sky HD handset for TV control using manufacturer-specific codes.

Setting up a Humax RM-F01 for NetAmp volume

Volume Control Setup

Steps to set up Humax RM-F01 for NetAmp volume using code 044.

Setting up a Humax RM-F01 for TV control

Setting up a Virgin Media remote control

Virgin Media Remote Setup

Procedure to set up Virgin Media remote control (type 13) for NetAmp volume.

Setting up a Sky Q Touch remote control

Sky Q Touch Remote Setup

Configuration via Sky Q box menu, selecting Philips and option 7 for NetAmp control.

Setting up a SkyQ IR remote

SkyQ IR Remote Setup

Steps to program SkyQ IR remote using specific button presses and code 0297.