Systemline S7 NetAmp - Setting up a Sky HD handset for NetAmp volume; Setup Procedure; Volume;Mute Allocation (Sky Mode); Additional Functions (TV Mode)

4
3.0 Setting up a Sky HD handset for NetAmp volume
You can set up a Sky handset to operate the NetAmp volume; handset revision 9 has been tested.
3.1 Press TV.
3.2 Press Select and 0 together. The LED will ash twice.
3.3 Enter the 4 digit code 1217. The LED will ash twice.
3.4 Press Select and 1 to store. The LED will ash twice.
After completion the Sky handset will allocate volume and mute buttons when in Sky control
mode as shown below:
When in TV control mode, the handset will allocate some additional IR functions as shown below:
Mute
Volume up
Volume down
Mute
Volume up
Volume down
Source down
Standby
Source up