Systemline S7 NetAmp - IR Control of Netamp; IR Code Table

3
1.0 IR Control of Netamp
The S7 Netamp has been designed for IR control via a Local Input Module or KPS11 keypad
plugged in from the zone. The IR codes are RC5 … …
A Sky digital HD handset can be set up to control a TV as well as the Netamp volume, see section
1.2
A Humax remote RM-F01 can be setup to control a TV and Netamp as well as a DVD player, see
section 1.4
2.0 IR Code Table
Below is a list of all supported IR codes and their references:
Function System code Command code
Standby
16 012
16 013 (long press)
Mute 16 013
Volume up 16 016
Volume down 16 017
Source up 16 070
Source down 16 001
Source 1
*
16 002
Source 2
*
16 003
Source 3
*
16 004
Local
*
16 005
O 16 006
# 1
*
27 001
# 2
*
27 002
# 3
*
27 003
# 4
*
27 004
# 5
*
27 005
# 6
*
27 006
# 7
*
27 007
# 8
*
27 008
# 9
*
27 009
# 0
*
27 000
Play
*
27 053
Pause
*
27 048
Stop
*
27 054
Skip forwards
*
27 052
Skip back
*
27 050
* NetAmp software 003-008 or 004-0012 or higher required