T Scale ATP - 8 Calibration

ATP/ASP/ASUP Price computing scales operation manual REV: C1, June 2012 ATP/ASP/ASUP Price computing scales operation manual
8. CALIBRATION
Press TARE key during self-checking to enter the parameter menus,
the default password is 0000.
When the parameter menu show "F0 CAL" press the TARE key.
The display will then show "unLoAd" to request all weight be removed
from the platform.
Press the TARE key to set the zero point after the stable indication
on.
Key in the calibration weight you want to use then put this weight on
the platform and then press the TARE key. The scale should be stable
after pressing the TARE key to accept a weight. The stability indicator
will turn on to show the value is stable.
When calibration is finished the scale will come into natural weighing
if it was successful.
-6-
Contents
1 INTRODUCTION……………………………..……….…….…….…...…1
2 KEYBOARD DESCRIPTIONS…………………….…….….………….1
3 GENERAL INSTRUCTION………………………………..……………2
4 BASIC OPERATION…………………………….…..………..…………2
4.1 Zeroing the scale………………..………….…………….………2
4.2 Tare…………………………………………………………………2
4.3 Overload warning…………………..………………….…….……3
4.4 unit price setting…………………….………………….……….…3
4.5 Change unit…………………………………………….………..…3
5. ACCUMULATOR OPERATION…………….…………………………..3
5.1 prepare to Accumulator………………..……………….…………3
5.2 Accumulator operation………………….……………….…….….3
5.3 Account operation………………………………………….………4
6. UNIT PRICE MEMORY………………….………………………….……..4
6.1 Save the Unit price…………………..……………….….………4
6.2 Load the Unit price…………………….……………….…..……..4
6.3 Use direct PLU……………………………………………..………4
7. OTHER FUNCTION…………………………….……………….…………5
7.1 backlight………………………………………..……….….………5
7.2 Automatic unit price clear…………………………………………5
7.3 Auto power off……………………………………….….……….…5
7.4 View audit operate…………………………………………………5
8. CALIBRATION……………………………………………………………6