Need help?Do you have a question about the T Scale bw series and is the answer not in the manual?
Controls power and sets the zero point for weighing operations.
Subtracts the weight of a container or previous load, showing net weight.
Recalls accumulated weights and stores current weight in memory.
Outputs data via RS-232 and allows changing weighing units.
Sets the zero point for weighing, accounting for minor drifts.
Subtracts container weight to display net weight of added items.
Sets alarms for weights meeting or exceeding stored high/low limits.
Configures high and low weight limits for check-weighing alarms.
Selects alarm behavior (OK, NG) and beep options for check-weighing.
Stores current stable weight into memory using the M+ key.
Recalls total accumulated weights and clears memory contents.
Configures the scale for automatic accumulation of weights.
Configures display backlight to be always on, auto, or always off.
Sets the time delay before the indicator automatically powers off.
To Next Page
General
