Need help?Do you have a question about the T Scale ROW Series and is the answer not in the manual?
Sets the zero point for all subsequent weighing operations.
Tares the scale by storing current weight and subtracting it from future measurements.
Process for determining sample weight, including taring the container.
Procedure to trigger alarms when weight meets or exceeds stored limits.
Allows manual accumulation of weights using the M+ key, with settings in PARAMETERS.
Configures the scale for animal weighing, locking reading when data is stable.
Mode for hopper scales, used for subtracting weight from a container.
Provides basic specifications for RS-232 output, including code, data bits, and baud rate.
Details data formats for normal weighing, parts counting, and total recalls.
Details the continuous output protocol for weighing mode (con1).
Procedure for standard scale calibration using a specified calibration weight.
Procedure for linear calibration using multiple weights at fractions of full capacity.
To Next Page
General
