T Scale TW20 Series - Page 59

TW20_NS20_EW20 Series Weighing Indicator Operation Manual REV:01
- 54 -
2.LINEA
R
CALIBR
ATION
To calibrate the scale in linear calibration
3.ZERO
CALIBR
ATION
To calibrate the scale in zero calibration
3.LASTCALIBRATION
To view the last calibration info.
4.INTERNAL COUNT
To show the internal counts
5.Scale 2
1.ON/OFF
To turn on/off the second platform
2.SCALE
RANGE
SETING
1.RAN
GE
MODE
SINGLE RANGE/DUAL RANGE/DUAL
INTERVA
2.CAP
ACITY
To input the scale capacity
3.DECI
MAL
POINT
To set decimal point
0/0.0/0.00/0.000/0.0000
4.DIVIS
ION
To set division 1/2/5/10
3.CALIBRAT
ION
1.NOR
MAL
CALIB
RATIO
N
To calibrate the scale in normal
calibration
2.LINE
AR
CALIB
RATIO
N
To calibrate the scale in linear calibration
3.ZER
O
CALIB
RATIO
N
To calibrate the scale in zero calibration
4.LAST CALIBRATION
To view the last calibration info.
5.INTERNAL COUNT
To show the internal counts
4.UPDATE
SOFTWARE
1.UPDATE PRINTER (USB)
To update application software via TTC
back office software