How to fix red LED during vehicle download on Tachosys digiPostpro Transmitter?
If a red LED appears in the Activity Window during a vehicle download with your Tachosys Transmitter, verify that a Company Card is inserted. Also, ensure the vehicle is stationary with the ignition on. Then, remove your digivu, wait 10 seconds, and reinsert it to try again.
General| Brand | Tachosys |
|---|---|
| Model | digiPostpro |
| Category | Transmitter |
| Language | English |
Steps to access the administration menu and navigate options.
Method to configure the device using a generated code instead of a card.
How to configure settings using a PC via USB and the digiConnect software.
Setting up network connections for the device.
Enabling and configuring clocking functions using driver cards.
Process of inserting a driver card to automatically transfer files.
Steps to configure a digivu using the digipostpro interface.
Instructions for adding the clocking module to the digipostpro base unit.
Navigating clocking settings and configuring button functions.
Using driver cards, allowing skips, and re-registering fingerprints.
Process for assigning a fingerprint to an RFID card or tag.
Using the device for clocking in/out and managing breaks.
Options available when fingerprint authorization fails.
Diagnosing and checking server connection errors.
To Next Page