11
REFORMAT YOUR SD CARD
When you reformat a SD card it will erase all data on the card. If you need assistance
reformatting your SD card see the following:
FOR A MAC:
Visit tactacam.com/support and to see video “SD Card Reformat on a Mac Computer”
for full detailed instructions
FOR A PC:
Visit tactacam.com/support and to see video “SD Card Reformat on a Windows Com-
puter” for full detailed instructions
Notes: It is best to format your SD cards before using. Only use the recommended SD
cards for Tactacam cameras. When formatting your SD card use ExFAT. For a list of the
recommended microSD cards, visit www.tactacam.com/support
Use care when handling memory cards. Avoid liquids, dust, and debris. As a precaution,
power off the camera before inserting or removing the SD card. Check manufacturer’s
guidelines regarding usage in acceptable temperature ranges.
REFORMATTING YOUR SD CARD - MAC/PC
2. Remove your microSD card from your Tactacam and insert the microSD card into
the provided microSD card adapter. Insert the microSD card adapter into your SD card
reader on your computer.
To Next Page
Loading...
Need help?
General
