XT-3 Reader Installation Manual & Data Sheet Doc no. 11-267 02
© TagMaster NA 27 (28)
5.6 Environmental Specification
5.6.1 Climate
Parameter Value Reference
Cold −40°C (−40°F) -
Heat +60°C (+140°F) -
Ingress Protection IP66
5.6.2 RoHS
The XT-3 reader complies with RoHS Directive 2002/95/EC
5.6.3 Electrical
Parameter Reference
Immunity CE: EN 301 489-3
Emission CE: EN 302 208-2 (radio) and EN 301 489-3
(EMC).
FCC: Part 15 subpart B. The reader fulfils Class A
digital equipment limits
Safety EN 60 950-1
NOTE: This equipment contains module FCCID: QV5MERCURY5E. It complies with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution
Information to user: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To Next Page
Loading...