XT-3 Reader Installation Manual & Data Sheet Doc no. 11-267 02
© TagMaster NA 9 (28)
for mounting the Reader on a wall or on a pole. The Universal Mounting Kit is suitable
for outdoor use. See separate data sheet for more details.
Figure 3 XT-3 reader mounted on a pole with Universal Mounting Kit
Mounting hole layout details are available in section 5.5.2, “Dimensions”.
Note: Do not drill any additional holes in the enclosure, as that would affect the sealing
specification.
Caution!
Never exceed the environmental and electrical limits specified in section 5, “Technical
Data”. Exceeding the limits can result in permanent damage to the reader.
3.4 Mounting the External Antenna (Optional)
The optional external antenna has the same physical dimensions and RF performance
as the reader and should be mounted in the same way as the reader (see section 3.3,
“Mounting the Reader”).
Different reader models require different external antennas:
Part No.
Model
163100 External XT-3 eu antenna
163200 External XT-3 us antenna
To Next Page
Loading...