Tait t2020 Application Note

Tait Electronics (Aust) Pty Ltd Application Note
AN016-01.doc Page 3 of 3 23-10-02
External Speakers Volume Control:
- Fit 25R wirewound pot to each remote head's external speaker for local audio volume
control.
NOTE: If minimum preset audio at speakers is required, fit 4R7 5W resistor between bottom
of pot to audio ground.
S9 LOOM:
Pin 1 - Pin 1 - Pin 1
Pin 2 - Pin 2 - Pin 2
Pin 3 - Pin 3 - Pin 3
Pin 4 - Pin 4 - Pin 4
Pin 5 - Pin 5 - Pin 5
Pin 6 - Pin 6
Pin 7 - Pin 7
Pin 8 - Pin 8
==============================================
Label Control Heads:
Main control head: MASTER
2nd control head : SLAVE
Maximum Cable Lengths:
- Max. resistance per wire to be no more than 4 Ohms (50 Ohms if separate DC plugpack is
used on 2nd remote head and un-switched +13.8V is not connected to 2nd head.
- LENGHTS USING STANDARD CABLE:
CABLE TYPE OHMS/METER MAX CABLE LENGTH
10 x .12 .17/m 25m
7 x .16 .13/m 30m
7 x .2 .086/m 50m.
Attachment: T2000CTL.S05 (Wiring schematic).

Tait t2020 Specifications

General

Brand	Tait
Model	t2020
Category	Radio
Language	English