Tait TM9100 Tune Up And Inspection

Tuneup General Information 8
August 2004© Tait Electronics Ltd
Install Applications
The upper two buttons in the Contents window of the product support
CD allow for the installation of the programming and calibration
applications:
1. Click the
“Programming” button. Installation of the programming
application begins automatically. Follow the instructions on the
screen to complete the installation.
2. Click the
“Calibration” button. Installation of the calibration
application begins automatically. Follow the instructions on the
screen to complete the installation.
3. The
Contents window remains open following installation of the
above applications. Investigate the remaining features of the
product support CD as described below, or click the
Close button
to remove the window.
4. Remove and store the product support CD.
Figure 1.3 The Contents window of the product support CD

Tait TM9100 Specifications

General

Brand	Tait
Model	TM9100
Category	Radio
Language	English